Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Semi-automatic front-outlet filling cell |
|---|---|
| Mixing ratio | 1:1-10:1 |
| Cartridge format | 490 ml AB dual cartridge |
| Filling method | Front outlet filling with piston pre-assembled |
| Viscosity | High viscosity, non-sag paste |
| Material supply | Original pack under 1 L or press plate |
| Control platform | PLC + touchscreen |
| Power supply | 220 V / 50 Hz (customisable) |
| Compressed air | 0.4 – 0.7 MPa |
| Operation | Semi-automatic, one operator |
A fully automatic two-component filling and capping cell with independent A/B metering, ratio verification and integrated tail-cap pressing. Built for epoxy, polyurethane, acrylic, silicone and structural AB adhesives.
A compact fully automatic line for low-viscosity two-component glues in 50 ml and 75 ml dual cartridges, combining precision metering, automatic capping and stable continuous output.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Front outlet filling changes the nozzle, fixture and air-management strategy, plus how you handle high-viscosity AB materials. Not a cosmetic variant.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
