Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Semi-automatic high-viscosity platen-fed cell |
|---|---|
| Mixing ratio | 10:1 |
| Filling volume | 490 ml total |
| Viscosity range | Up to 1,000,000 cps |
| Material supply | 200 L drum platen press |
| Filling system | Twin servo volumetric metering |
| Filling accuracy | ≤ ±1% per component |
| Control platform | PLC + HMI |
| Power supply | 380 V / 50 Hz / 3-phase |
| Compressed air | 0.5 – 0.7 MPa |
A fully automatic two-component filling and capping cell with independent A/B metering, ratio verification and integrated tail-cap pressing. Built for epoxy, polyurethane, acrylic, silicone and structural AB adhesives.
A compact fully automatic line for low-viscosity two-component glues in 50 ml and 75 ml dual cartridges, combining precision metering, automatic capping and stable continuous output.
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Ratio range, viscosity, cartridge format and realistic output. A practical checklist to settle before you ask a supplier for a quotation.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
