Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
A fully automatic two-component filling and capping cell with independent A/B metering, ratio verification and integrated tail-cap pressing. Built for epoxy, polyurethane, acrylic, silicone and structural AB adhesives.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Fully automatic two-component filling and capping cell |
|---|---|
| Mixing ratio | 1:1 to 10:1 (up to 20:1 configurable) |
| Filling volume | 50–600 ml total (10–1,500 ml on request) |
| Viscosity range | 5,000 – 200,000 cps |
| Production capacity | 10–20 cartridges / min |
| Filling accuracy | ≤ ±1% per component |
| Control platform | Siemens PLC + HMI, ratio alarm, batch log |
| Material contact parts | SS316L, separate A/B paths |
| Power supply | 380 V / 50 Hz / 3-phase (customisable) |
| Compressed air | 0.5 – 0.7 MPa |
| Optional | Vacuum filling, plunger insertion, cartridge crimping, inline labelling |
A compact fully automatic line for low-viscosity two-component glues in 50 ml and 75 ml dual cartridges, combining precision metering, automatic capping and stable continuous output.
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Ratio range, viscosity, cartridge format and realistic output. A practical checklist to settle before you ask a supplier for a quotation.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
