Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
A compact fully automatic line for low-viscosity two-component glues in 50 ml and 75 ml dual cartridges, combining precision metering, automatic capping and stable continuous output.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Compact fully automatic line for small dual cartridges |
|---|---|
| Cartridge format | 50 ml / 75 ml AB dual cartridge |
| Typical ratio | 1:1 / 2:1 / 10:1 (configurable) |
| Viscosity range | Low viscosity to 30,000 cps |
| Filling system | Twin servo metering |
| Production capacity | 10–20 cartridges / min |
| Filling accuracy | ≤ ±1% per component |
| Control platform | PLC + touchscreen HMI |
| Power supply | 380 V / 50 Hz / 3-phase |
| Compressed air | 0.5 – 0.7 MPa |
A fully automatic two-component filling and capping cell with independent A/B metering, ratio verification and integrated tail-cap pressing. Built for epoxy, polyurethane, acrylic, silicone and structural AB adhesives.
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
