Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
Metering and capping for standard 310 ml single-component sealant cartridges, covering silicone, PU, MS polymer and acrylic caulk with ±0.5% filling accuracy.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Single-component sealant cartridge filler |
|---|---|
| Filling volume | 250–310 ml (adjustable, up to 600 ml on request) |
| Filling accuracy | ≤ ±0.5% |
| Production capacity | 5–15 cartridges / min (operator dependent) |
| Cartridge size | Φ47–Φ52 mm, 200–350 mm length |
| Filling system | Servo-controlled volumetric metering |
| Material contact parts | SS304 / SS316L, quick-clean head |
| Control platform | PLC + 7" touchscreen |
| Power supply | 220 V / 50 Hz |
| Compressed air | 0.4 – 0.7 MPa |
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Semi-automatic 1:1 2K cartridge filler built for low-viscosity liquid AB adhesives. Independent A/B stainless-steel pressure tanks, vacuum degassing and servo-driven metering pumps deliver bubble-free filling at ±1% accuracy.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
