Specifications, compatible materials and available options. Download the spec sheet or send us your requirement — we will confirm feasibility after a sample filling trial.
An economical semi-automatic labeller for mixed-ratio AB cartridge production, where SKUs change frequently and fast changeover matters more than raw speed.
Indicative configuration data. Final values are confirmed in writing after material testing. Before shipment, every machine completes a no-load trial run covering motion sequences, alarms and idle cycling.
| Equipment class | Semi-automatic cartridge labelling machine |
|---|---|
| Cartridge ratios | 1:1 / 2:1 / 3:1 / 4:1 / 10:1 |
| Label type | Self-adhesive roll label |
| Capacity | 8–15 pcs / min (operator dependent) |
| Changeover | Under 10 minutes between formats |
| Control | Semi-automatic, foot-pedal start |
| Power supply | 220 V / 50 Hz |
| Compressed air | 0.4 – 0.6 MPa |
Front outlet filling with the piston pre-assembled. Designed for high-viscosity 10:1 AB adhesives supplied from small original containers rather than a bulk tank.
Built for extremely viscous two-component formulations up to 1,000,000 cps, with a 200 L platen press feed and a robust twin metering system.
Semi-automatic 1:1 2K cartridge filler built for low-viscosity liquid AB adhesives. Independent A/B stainless-steel pressure tanks, vacuum degassing and servo-driven metering pumps deliver bubble-free filling at ±1% accuracy.
Tell us your material, cartridge format and target output. We reply within 24 working hours.
